Performance Based Commercial Roofing, Polyurethane Foam and Elastomeric Coating Contractor

Spray Polyurethane Foam Roofing Systems


Salt Dome Polyurethane Foam   Salt Dome Sprayed Polyurethane Foam

The polyurethane roof system weighs less than one pound per square foot, which is significantly lighter than an equivalent thickness of built-up roofing. Polyurethane foam is the most efficient insulation available with an R-Value of 7.14 per inch.

NEOGARD’S® Sprayed-in-Place Polyurethane Foam (SPF) Roof Systems are 100% sustainable, fully adhered and seamless. The first NEOGARD® SPF Roofs were applied in the 1950s. Since that time, NEOGARD® has continued to lead, improve and pioneer innovative SPF Roof Systems with polyurethane, silicone and acrylic roof coatings to protect the insulating membrane.

NEOGARD® SPF Roof Systems have documented performance track records coupled with the lowest LIFE CYCLE COST, LEED friendly and Energy Star certified systems,

Polyurethane Foam Finish

Urethane foam roofing is a sprayed-on-system of insulation and coating that benefits the owner with versatility and flexibility in design.

Seamless - A sprayed NEOGARD® polyurethane roof forms a seamless insulated roofing system. It has no joints or seams that often allow outside water and air to pass through the roofing system into the building structure. Whether a roof is 10,000 square feet, 100,000 square feet or larger in size, it will have NO SEAMS.

Eliminates Flashing Leaks - Because a sprayed NEOGARD® polyurethane roof system conforms to the substrate and when installed is a seamless system, it is ideal for flashing parapet walls, roof penetrations and roof mounted equipment, including vents, pipes, stacks, HVAC equipment, skylights and cooling towers. Many roof leaks are caused by faulty flashings. Sprayed polyurethane solves this problem.

Elimination of Ponding Water - In re-roofing applications, ponding water may be eliminated by adding an increased thickness of polyurethane insulation in low areas. Building up the low areas and sloping the roof, so that it drains properly, will eliminate ponding water and the additional load factor that is caused by water accumulation.

Lightweight - The weight of polyurethane insulation is between 2-3 pounds per cubic foot. One inch of polyurethane insulation plus 30 mils of an elastomeric coating weighs approximately 60 pounds per 100 square feet, as compared to approximately 600 pounds per 100 square feet for a typical conventional four-ply built-up roofing system. This makes a sprayed Neogard polyurethane roof system ideal for reroofing, as it is often possible to apply over an existing built-up roof without removing it.

Highest "R" Value - Sprayed polyurethane insulation has an "R" value of 7.14, enabling it to provide more thermal resistance with less material than any other insulation.

Chemically Stable - NEOGARD® polyurethane roof systems are chemically inert. They are odorless, resist attack by either mildew or fungi and have no nutritive value.

Rigidity - While sprayed polyurethane insulation is very lightweight, it is strong and will not pack down or sag.
8. Minimizes Thermal Shock - Because a NEOGARD® polyurethane roof system is seamless, has a high "R" value and uses a reflective elastomeric coating, it greatly reduces the thermal shock a building is subjected to by fluctuating outdoor temperatures.

Versatility - Polyurethane Insulation can be used on both new and replacement roofs, whether flat, pitched, saw-toothed, domed or having unusual slopes or configurations. It is also ideal for application to tanks, freezers, coolers, piping, ductwork and various aerospace projects.

Flexibility - It has the ability to withstand a structure's normal expansion and contraction without affecting the ability to keep the structure protected from the outside elements.

Watertight - Polyurethane insulation is made of billions of minute closed cells which resist the penetration of water and vapors. It must, however, be protected by an elastomeric coating suited for use in that particular environment. Neogard coatings are specifically engineered for this purpose.

Long-lasting - The NEOGARD® elastomeric coating system which protects the polyurethane insulation can be rejuvenated by the re-application of additional coating after the initial coating system has weathered after many years of service.

Ease of Application - A NEOGARD® polyurethane roof system can be applied in a relatively short period of time with little or no disruption of building operations by our experienced and qualified roofing crews.

Ease of Maintenance - Minor repairs or modifications to a NEOGARD® roof system can be made by in-house maintenance personnel. All that is needed is a hand caulking gun and a tube of caulk.

Energy Efficient, Cost Effective, Let The Roof Pay For Itself! It is recommended for:

  • Flat roof design
  • Sloped roof
  • Metal buildings
  • Tanks and steel structures
  • Domes and geometric structures
  • Cold storage
  • Hail damage and weather related repair expertise

Selecting a new roof is a big decision. Having confidence in the system and the company that stands behind it is very important!